Does your bathroom trip lever stick? The drain in the bathroom tub causes the flowing of water through pipes. The point is to manage the system that holds that particular drain.
You will pull or push the trip present on the bathroom tub for that purpose. How does a bathtub trip lever work? You will need to know the mechanism to take advantage of this lever.
This post will lead you to know when to pull or push the lever so that it will not create any mess in your bathroom. For many years, people are not aware of the proper usage of trip levers.
Thus, they have created problems for themselves in this way. Keep reading till the end to know the working of the bathroom trip lever.
How does a bathtub trip lever work? Identify the ways:
- How will you stop the water from draining through the stopper? You will see the trip lever drain stopper on the top of the bathtub. Through this stopper, you will control all the water flow in the tub.
- You can stop the drain by putting on the stopper. But sometimes, it does not work, and the water still flows through the drains. Let us figure out how you will put this issue to an end.
- We will discuss whether the bathtub trip lever up or down to the drain.
Trip lever drain stopper:
- Normally, the trip lever in the bathtub is quite simple. Let us go through the mechanism of the trip lever in the bathtub.
- You will see a button on the front of the trip lever. You will push that lever downwards; it will sink the water flowing through the drain.
- Pulling the trip upwards will stop the water from passing through the drain, and the stopper presses down in the drain hole.
- That’s how it generally works, but if it is not working this way, you will need to put out the trip lever and check every inch.
Bathtub trip lever up or down to drain:
- In case you want to fill the tub, you will lever down. What if it does not let the tub fill?
- There must be various reasons that your lever is not working properly.
- Maybe your lever is too old that it has the crude stuck, causing jammed pulling and pushing of the drain. For that purpose, you will need to use the lubricants to degrease your trip lever.
- You will ultimately see a lot better and smooth results in draining the lever.
- Although you will need to put the drain out of the trip lever hole, keep reading till the end to know the procedure.
Procedure:
-
- You will need a sure driver to open the faceplate of the lever.
- Once you open the surface, you will carefully take the drain linkage out of the trip.
- We are not supposed to break it as it will cost dollars to buy a new one.
- Take the needle nose pliers. You will remove the cotter pin and detach the faceplate from the linkage.
- You will surely notice that the trip is jammed, so you can use the lubricants or change the faceplate.
- Thus, you can get the new faceplate as; lubrication is not enough.
- You will get the new faceplate and attach it to the linkage.
- After the new faceplate, you will place the cotter pin back using the needle nose pliers.
- If the bathtub is not draining properly, you will pull the lever up to drain the sink well.
- When you are putting back the trip lever, be sure to put the thicker side of the linkage upwards.
- And the thinner part of the linkage the downwards.
- Now screw the trip lever faceplate tightly with a screwdriver.
- You are done with the treatment.
FAQs:
Why does the stopper not let the water stop flowing through the drain?
The trip lever is jammed, and maybe that is not letting the stopper place at one spot. The gap between the stopper and drain is causing the water to pass through easily. So, you might change the stopper or fix the trip lever.
How will you keep that one trip lever working for a longer time?
To keep using the same trip lever for years, you can lubricant the lever twice every six months. This lubrication is not expensive and lets your lever works more smoothly. So, it is preferable to use the lubrication method instead of changing the whole faceplate unless it is broken.
How to weigh the linkage properly?
Weighing your linkage in the drain is way too important. It is the main thing that lets your trip lever work properly. The thinker edge of your linkage must be on the upside of the lever, and the thinner weight will go on the downside of the linkage. In case the improper weighing of the trip will cause trouble with the jammed trip or the drain blockage.
Conclusion:
Are you frustrated due to a jammed trip lever? Does your bathtub is not draining the water properly? You must be thinking of calling the plumber, but you can fix it yourself.
How does a bathtub trip lever work? That post is a complete guideline to know the possible advantages of the lever and trip drain stopper.
You must know the facts of when to bathtub trip lever up or down to drain. The pushing and pulling of the lever and its weighing are much more important to know the proper use. It will probably jam the trip if you don’t know lever weighing. Thus, the drain will also let the water stop through the stopper, causing a lot of water wastage.
