Table of Contents
Plumbing is typically something we delegate to professionals, but installing a sink faucet is an exception. In terms of a vertical arrangement, a sink faucet in a pantry or carport may have a few differences from a sink faucet in a washroom or kitchen. It’s sometimes easier than installing a kitchen faucet because sinks are often open-sided, allowing easy access.
Buying a new faucet is an exciting experience. It’s a minor adjustment, but it has a significant impact on capacity and design. We’ll show you how to replace a sink faucet in no time.
What Should You Know About Faucet Installation?
To begin with, while purchasing another faucet, you want to guarantee it will accommodate your sink. Does your sink have one, a few holes? This data is basic to have available while looking for a replacement faucet.
Additionally, it might be clear that you want to guarantee the water valves are switched off under the sink before you start dealing with the faucet installation. What may not be so clear is whether you want to replace something beyond the faucet while you’re down there.
Mounting Variations for Sinks
Undermount: With undermount sinks, the holes for the faucet are normally bored into the countertop as opposed to the sink.
Drop-in: In most drop-in sink styles, the faucet holes are bored into the back spine of the sink. Most sinks have three holes spaced 4 to 8 inches apart.
Farmhouse: The faucet on farmhouse-style sinks is typically mounted on the wall behind the sink or in holes in the sink’s vertical backsplash.
Vessel: These sinks typically have a single-handle countertop faucet that requires only one hole in the countertop. The majority of vessel sink faucets have a curved, tall structure ramble. On the other hand, a vessel sink faucet can be a wall-mounted model.
Things You’ll Need For This DIY Project.
It is not difficult to replace a bathroom faucet, but there are a few tools that you will need to remove the old faucet and replace it with the new one. You will need the following means:
- Adjustable wrench
- Basin wrench
- Faucet and package contents
- Plumber’s putty
- WD-40
- Bucket
- Silicone caulk
- Towel
- Putty knife
Step By Step Process To Change Sink Faucet
Here are some easy steps that you need to follow to change the sink faucet:
The clean area under the sink
To have a clean and organized working area, remove everything from under your sink. Prepare a pail and a change of clothing since you will need them soon.
Turn off the water
Many individuals, to be honest, do not shut off the water at the old supply line wall faucet. The line will be depleted once the water is turned off. To turn off the water, locate the water supply valves and turn them as hard as you can.
Before removing the faucet, switch on the hot and cold lines at the spout to drain any standing water from the faucet and hoses. To catch any remaining water in the supply lines, place a container beneath the connectors.
Remove the Existing Faucet
Turn off the water at the valves under the sink before removing the current faucet. Before disconnecting the lines, test the existing faucet to make sure nothing is running. There are two nut setups besides the tap. The first pair secures the water supply line, while the second secure the sink faucet.
The faucet nuts maintain your faucet in place by being situated above the water supply line connections. If you can’t get them out the hard way, you may need to use a wrench and some WD-40.
Put the sink gasket in place
A seal between the faucet and the sink is essential before connecting another faucet. Plastic or elastic gasket is included with a few new taps. If not, a snake made of handyman’s clay might be placed on the sink where the faucet will be.
Install the new faucet
Drop the new faucet into the holes and focus on it—screw on the latches to hold it while your assistant has the spout consistent. Fix them with a suitable device. They may not be the very sort of clasp that held the old faucet, so you might have to use an unexpected device in comparison to the one you used to remove the old faucet.
Wrap every one of the threads with handyman’s tape
Handyman’s tape is designed to grease up fittings and make a superior seal between components. Wrap the finish of the faucet tailpipes with a layer of handyman’s tape, ensuring the tape doesn’t stretch out beyond the finish of the line.Connect the hot and cold valves.
Release one of the valves’ mounting nuts and washer, then push the valve up through the sinkhole. From a higher location, connect the escutcheon. Manually tighten the mounting nut (from beneath the sink), then tighten it with a wrench. For the other valve, repeat the process.
Re-connect the supply lines and check for spills
Using a wrench, reconnect the water supply line to the valve. If you settle too much, the seal will be broken. Turning on the water valve is the most effective method. With your thumb, check for any spilling around the valve. Continue to fix it until the water stops flowing.
Turn on the water and remove the aerator.
Remove the aerator from the faucet after the supply lines are attached. Contingent upon your model, you might have to use a little instrument to unscrew the aerator. Once the aerator is released, now is the right time to check whether all your work paid off.
Gradually turn on the water and look at every one of the connections for spills. Allow the water to run for a couple of moments to clear the lines, then, at that point, turn off the faucet and replace the aerator. That’s all there is to it; you’re finished!
