How To Clean Delta A112 18.1m Shower Head? A Complete Guide

Many households have delta a112 18.1m shower heads in their bathrooms. Shower heads are a part of everyday use. Due to active utility, shower heads quickly get calcium deposits from hard water, and mildew grows due to the wet shower head.

Hard water deposits can block the water path in the shower head. Calcium deposits block the small holes that drop the water in the form of stream-lets. You are on the right page if you want to remove all hard water deposits and mold on the shower head. This article will tell you the best methods to clean the delta a112 18.1m shower head. You will also get to know about the appropriate cleaning items and tools to disengage the shower head.

Fortunately, this article has listed all the important information to clean the shower heads.

It is essential to identify which part of the shower contains clog or blockage. Sometimes clogs can be in the pipeline, and the real culprit behind slow water flow can be the pivotal pipe connection.

However, if you can see the clog in the holes of the shower head, then you can plan to clean it. You can check the condition of your shower head by using a torch as well. Once you have identified the root cause now is the time to detach the delta a112 18.1m shower head from the handled body.

Before cleaning the shower head, you need to detach it from the hose. This will make your cleaning way easier and smooth. Follow these steps.

1. Take out the hose first.
2. Twist the shower head in a clockwise direction.
3. Once the shower head detaches, make sure you secure the rubber washer in the hose.
4. Now you can clean the shower head.

It is crucial to clean the shower head if you want it to work smoothly with good water flow. You need to clean the nozzles thoroughly to get a good spray.

Vinegar is a natural cleaning agent. It carries the natural capacity to kill harmful bacteria’s, remove stains, and soften hard water mineral deposits on faucets.

Things you will need:

• Vinegar
• Water
• Bucket
• Toothbrush

Steps:

• Take a bowl. Add one vinegar to it.
• Soak the shower head in it.
• Make sure the level of vinegar should be high so that it completely soaks the shower head in it.
• Now keep the shower head in vinegar for the house or overnight.
• Take out the shower head.
• Scrub it with the help of a toothbrush.
• Rinse under clear water.
• Pat dry with a soft cloth.

In the market, you will see many chemical-based faucet cleaners. CLR calcium remover enhanced formula is one of those cleaners. These cleaners work instantly and help you get rid of clogs and mold, but they are very expensive. Do not let these cleaners directly touch your skin. Always wear glasses before touching these cleaners.

The thing you will need

• Commercial faucet cleaner (CLR)
• Water
• Toothbrush
• Cloth

Steps:

• Take one part cleaner and add three parts of water to it.
• Dilute the solution before using it.
• Now soak the shower head in the water and clean the solution.
• You will see instant sparks. These cleaners are highly acidic and remove clog quickly.
• Now soak the shower head only for 5-7 minutes.
• Take the shower head out.
• Take the toothbrush and scrub the holes of the shower plate with it.
• Rinse off with clean water. Dry it and put it on again.

Note: Do not drain the cleaner solution straight in the drainage. It can stain your sink and your pipe can also burn. Open tap water and drain the solution under water gradually.

Baking soda naturally contains cleaning agents. It is the best deodorizer as well. If your shower head stinks bad, baking soda will help you get rid of that foul smell. The dishwasher will give a foamy and soapy texture to your solution. In the meantime, vinegar will help by killing harmful bacteria.

Things you will need:

• Baking soda
• Vinegar
• Water
• Dish washing liquid/soap
• Bucket
• Toothbrush
• Soft cloth/microfiber cloth

Steps:

• Take a bowl. Add one cup of vinegar to it.
• Now take one tablespoon of baking soda and add it to the vinegar.
• Add two tablespoons of dish washing liquid to the solution as well.
• Mix the solution and soak the shower head in it.
• Keep the shower head in the mixture for half an hour.
• Now take the shower head out.
• Take a toothbrush. Roll it in the dry baking soda.
• Scrub the brush with baking soda.
• Baking soda will unclog all the holes in the shower plates.
• Rinse the shower head with clear water and dry.

Bleach will help to remove any mildew and kill the harmful bacteria in the shower head. People use bleach as a cleaning agent.

Things you will need

• Bleach
• Water
• Deep bowl/container
• Cloth

Steps:

• Take four tablespoons of bleach and add it to three cups of water.
• Do not forget to wear gloves.
• Now soak the shower head in the mixture of bleach and water.
• You may also take a deep spoon and fill it with the mixture.
• Now pour the mixture into the holes. Pour from the hose connection area as well.
• In case the clog is in the pipe, it will be removed.
• Keep it in the bleach water for 15-20 minutes.
• Rinse it off until you get away with all the bleach.

Shower heads are in regular use in every household. They develop mold and accumulate hard water deposits due to regular use. It is hence important to clean them over a regular interval. You can deep clean the shower head every six months. Vinegar, baking soda, bleach, and dish washing liquid can serve the purpose. These are cleaning agents which are available in all houses. You can clean your shower head with their solutions. However, if you want an instant result, commercial faucet cleaners are also available in the market. Replace the shower head in case of severe clog or mildew. You can also seek help from professional cleaners.