A garden hose is used to transfer water outdoor. In addition, the faucet helps the flow of running water when performing different activities. Faucets are frequently named as water outlets, hydrants, and bibs. So if you need water outside your house, then you need to connect the faucet to the hose because it is shown that watering the garden with a faucet is much easier than carrying buckets full of water.
Maybe it is easy for some, but visually it is impossible to perform without a gardener. Gardening is a healthy activity, and it is supposed to be relaxing, but sometimes it can change to something that is really stressful. But you can make this easy if you learn how to connect garden hose to outdoor faucet. If you have learned it, you can water your garden and use it for different purposes without wasting a lot of water.
A Garden Hose Connector
If you are unfamiliar with a garden hose connector, I will tell you about it. It is a joint of metal or plastic parts that are used for connecting a variety of things to a hose. So before buying it, you should know about it. There are a variety of Garden hose connectors available in the market.
You can choose from them, but the difficult decision is which one to choose? In order to learn how to connect a Garden hose to an outdoor faucet, you should know what some types of fittings and adaptors you can buy are. Most people use plastic, aluminium, or brass fitting.
In my opinion, the best are brass ones, they can be expensive, but they will not get rusted. If you want something cheaper, then you have the option of a plastic connector. however, it totally depends on what are your requirements
Sizes of a Garden Hose Connector
Depending upon different types, there are different sizes of a garden hose connector. It can come in a variety of shapes and sizes. Some of the sizes are half-inch, 3 by 4 inches, and 5 by 8 inches. However, 3 by 4-inch size is used usually. A 3 by 4 size connector is used because for its efficiency, it has high pressure and works perfectly for almost all purposes. The best thing is it is also used at professional levels.
Items needed to connect a garden hose to an outdoor faucet
- bucket
- gasket
- faucet connector
How to connect garden hose to outdoor faucet
If you have an outdoor faucet, then I will help you to learn how to connect a garden hose to an outdoor faucet. Here are steps that you should keep in mind while connecting your garden hose to an outdoor faucet.
Get the faucet connector ready
First of all, attach the holes to the faucet if the adaptor is small, and screw onto the outdoor faucet. You can convert its end into a male Garden hose connector.
Untwist the faucet tip
In the second step, you have to unscrew the tape of the faucet. In this step, be careful that no pieces are contained without the tape that you can drop. for convenience, you can use a towel or a cloth below to avoid things dropping into the drain.
Fasten up connector
Now it’s time to attach a new adaptor. This adaptor should be well and tight. You can do it easily without using any tools, clean your hands if they are sticky, and seal them very tightly.
You can use a hose-type vacuum breaker because it will avoid drawing waste into the water supply and sliding the chemicals inside, resulting in a submerged contaminated container.
Place the hose gasket
It’s time to check the hose gasket. If it is properly in place, you can use a rubber gasket, as it can easily fit inside and prevent leaks. If the gasket is placed incorrectly, you will feel wetness and sogginess.
Screw the hose to the connector
Now it’s time to screw the hose adaptor. You can do it by making it secure by using all your strength, and there should be a proper seal if you want no leakage. Once you are done, you can connect the faucet tip to see if the job is completed.