Table of Contents
In this guide, we’ll read about how to remove the delta bathroom faucet handle. We’ve added every minute detail so you won’t have to worry about anything.
Sometimes removing the Faucet handle can be tricky. That’s why you must remove it carefully and follow proper methods.
Usually, Delta faucets don’t come out because of the calcium deposits. These cause the handle to become harder and more rigid.
Check out what to do if the Delta faucet handle is difficult to remove below.
How To Remove Delta Bathroom Faucet Handle?
Keep reading to find out some simple methods that will help you to remove the faucet handle.
Drill Through The Side Allen Keyhole
It’s necessary to look at the Allen keyhole if you want to detach a Delta faucet handle that doesn’t have any identifiable screws.
Why Is This Hole Significant?
You can reach the retaining mechanism that holds the Delta faucet handle in line. Each model features a side-accessible Allen key hole like this one. When you look at the handle, you need to notice it.
You will use a drill to loosen this handle when you’ve located it. During it, you wouldn’t have to drill tightly.
Woodblock Pressed Firmly On The Side
The next step is to push a woodblock against the side.
The woodblock should be flush with the side of the handle at this point. This will guarantee that the handle will become looser in response to any touch to the side of the woodblock.
Why Not Strike It Without The Use Of A Woodblock?
The Delta faucet handle’s surface should be secured. It will snap or crack if you whack it with a hammer directly!
For this reason, it’s vital to use caution when pounding. The woodblock can help this step of the process.
You may complete the task by simply turning on the drill slowly and rotating it with the appropriate bit. As you go through the drilling process, check if it fits well.
Hit Lightly With The Hammer
For this procedure, you won’t require a Delta faucet handle remover.
Alternatively, you will hammer the woodblock while it is pushed up to the hole. Avoid swinging the hammer violently when doing this.
The handle will break as a result of this, making it unusable.
You must softly strike it to test if it responds. Most of the time, you’ll find that a couple of taps will make it move.
This is important as you try to find how to unstuck a jammed Delta faucet handle.
Pull The Screwdriver Up From The Base
Pulling it out is the last step.
To achieve this, insert a screwdriver deeply into the Delta faucet handle’s base using a screwdriver. This will become clear as soon as you hammer the faucet’s side.
It will start to move.
Doing this will make a space close to the base into which you may insert the screwdriver. It need not be a screwdriver, but this is a simple instrument to use when you start to pull up.
Pulling continuously until it falls off is the final step. It shouldn’t take much power to do this.
Safety Precautions
You should read these safety instructions before you start working on the faucet. So you may depend on it if you need to do a house repair. By taking a few quick actions today, you may save future hassles.
Disconnect the Water
Before disassembling to remove the faucet handle without a screw, turn off the water to solve this issue. Sometimes, a faucet may leak while the water is running; however, turning it back on will cure the problem if you cut off the water. Shutting off the water supply might also address the issue if the valve body is broken or damaged.
Shut Off The Drain
It may include a variety of tools and tiny components. When something falls into the drain or out of the entrance, it is preferable to cover it with a tiny towel to catch it or to seal the drain when no equipment is being used. However, it will take significantly more work if you also have to unscrew the drain.
Safeguard Your Faucet
A grip tool will guard the surface of your fixtures when you need to utilize tools like pliers. Avoiding hard handling, scratching, or gouging the paint on your faucets or tap handles is usually preferable.
Types Of Faucets Handle
A Faucet Handle With A Button Or Cap
On the top of a faucet, the words “hot” or “cold” written in stylized handwriting denote a temperature setting, which is often a capped faucet. Typically, a kitchen and bathroom tapped faucet will simply have a cap and a plug installed for aesthetic purposes and maintenance.
A Two-Handled Faucet
This faucet includes two knobs that you may use to change the pressure and temperature and a nozzle that controls when the water is discharged. Instead of being functional to have a withdrawal nozzle on its own, this is commonly found as a fourth type. This fixture offers a great solution when your kitchen or bathroom has a large countertop and a water-free featured area.
Low-Arc Lever-Style Faucet Handle
Spouts with low art sit in the sink basin and spray water when activated. They are typically utilized in public or commercial settings because they reduce the distance water must travel from the faucet to the sink. A dual-lever sink faucet handles are used to turn the water on and off. The temperature of the hot and cold can be changed individually by each faucet handle.
In most cases, two-centered holes in the walls 8 inches apart from centre to centre may accommodate two-hole broad faucets for simple wall mounting. When mounted on the wall, these are less likely to hinder other things in a small or active kitchen.
Frequently Asked Questions (FAQs)
How to remove the delta bathroom faucet handle easily?
Well, if you’ve read the above article properly, you already know the answer to this question as we’ve described every process in detail.
How many types of faucets are available?
There are many types of faucets in the market, but three commonly used are lower arc faucet handle, double-handled faucet, and a button or cap faucet.