Table of Contents
If you are unaware, how does Moen Shower Valve Replacement work? Well, don’t worry, we have got you covered, luckily. Keep reading, and you’ll have your answers.
The Moen has a simplistic cartridge system that is used for several single-handed valve bodies. Shower, bathtubs, and basins in the kitchen and bathrooms are examples of this. More notably, this group provides a wide range of goods using just a few cartridges of the same sleek design.
The Moen method is essentially highly effective since the valves may be readily adjusted with force while maintaining their place. Because it is so easy and uncomplicated, replacing a shower valve cartridge would only take 15 minutes. To start, consider these pieces of advice.
Step-By-Step Moen Shower Valve Replacement Process
Follow these methods carefully.
1. Cut off the water supply
Wear goggles to shield your eyes and shut off the water supply to keep the workspace tidy and clear of clutter.
2. Take away the faucet lever
You must use a pry bar or plain screwdriver to unscrew the faucet lever. Use a clean blade to find a way to turn the tap handle’s screws.
3. A holding clip and a spacers sleeve
In certain situations, pushing out the spacers sleeve may be necessary, which is frequently seen on showers and pipe valves, and conceals the used caulk. Afterward, you must remove and secure the holding clip. It’s essential since failing to do so would result in the valve being accidentally damaged.
4. Extractor Device
Consider using the Moen remover tool if at all available. That’s the white equipment that is included with your cartridges order. While turning the cartridge-free, it would be used. You can use this tool to remove the stem from valve cartridges when you don’t have a set of pliers available.
5. Pure Mineral Reserves or Limestone
If there are salt or mineral accumulations, start by cleaning the valving body with vinegar. This is effective. You must moisten the new valving body in order to accomplish this. Be careful not to rinse the lube out of there.
6. The Valves Cartridge
Slide fresh cartridges back into valving body till it discharges from the holding clip is gone. Keep in mind that it should align the cartridge’s heads with holes, not in contradiction to it.
7. A holding clip
Attempt to insert the holding clip inside it. Be careful to position it such that you can simply expose the tab to flush the exterior valving body. Using the removal tool, you may twist and place both at this stage. Similarly, if the clip isn’t installed, the water pressure would drive the cartridges out from the valve.
8. Bringing Back the Components
If required, slide the spacer sleeve securely in place. The tap lever needs to be slid back together at the same moment.
Do not forget to restart the water supply and confirm that the warm or cold option is facing the appropriate way. The tap must also be screwed back in, as well as the lever covering. This seems to take care of the issue with the showering valve cartridges that were broken.
Shower Valve Types
Several various sorts of valves have been used to run showers in houses. The fitted taps will determine the kind of valves in the bathroom.
Pressure Balance Valves
The residence likely has pressure balance valves that regulate the temperature and pressure of the water supply. In order to guarantee the correct temperature of water from the showers, pressure balance valves keep the proportion of warm to cold running water steady and adjust as necessary to consider pressure fluctuations.
Specific Thermostatic Valves
Thermostatic valves particularly control the temperature of the water to a specified limit. With something like a thermostatic valve, users can switch on the water and wait for this to reach the right degree instead of making frequent changes to achieve the ideal temperature of the water.
Transfer And Diverter Valves
The flow of water in the showerhead is adjusted via diverter and transmission valves. The device that enables you to divert water from the bathtub exit and direct this to the shower and back into this valve.
Shower Valve Problems
With time, the showering valves in the house may develop issues that need to be fixed in order to enhance shower functionality and avoid leakage. Showers valve problems that are typical include:
Lime Scale
The showering valves in the home accumulate lime and grime with time. This accumulation impacts the valves’ functioning, resulting in temperature changes.
Wear
The regular usage of showering valves causes damage—leakage results from its sealants aging. The valves’ internal parts deteriorate, slowing the valves’ responses—the shower’s temperature changes due to damaged bearings.
Hot Water System
Shower valve adjustments may be necessary after setting up a new hot water system or altering the temperature and pressure of water flow from the hot water system. A pressure balance valve’s cutoff might have to be adjusted to consider the latest hot temperature of the water and the thermostat valve’s temperature controls.
Problems brought on by lime scaling and dust accumulation is usually resolved whenever you cleanse the tap components. To do this, the cartridges and other parts must be taken out and immersed in vinegar or limestone solution. To ensure that the showering valve and faucets work as planned, the system should be carefully greased and reinstalled.
Frequently Asked Questions (FAQs)
What is the Moen shower valve replacement process?
The process of replacement is quite easy and basic; one can replace it easily if they have handyman experience. Just follow the above process, and you’ll know what to do and how.
Do all Moen valves work together?
Four different varieties of one-handled showering valves are among the several varieties of showering rough-in valves that Moen has produced. It cannot switch out the trimming kits. This is important to determine what valve is presently placed by observing the escutcheon screw’s placement and lever movement.
Are shower valves expensive?
No, not much; the shower valves are pretty affordable.