As you’ve ended up here on this article, chances are that you might be among the majority of people who dislike the way tap water tastes. You’re also aware that affording bottled water is not a wise option either.
The most apt choice here would be to install a nice water filter for the pull – out faucet.
You surely do not wanna spend too much on purchasing mineral water every single time or drinking poor quality tap water which smells like it is straight from a swimming pool.
How to Install Water Filter Pull Out Faucet: Installation Guide
A water filter pull out faucet is basically a mini version of the huge carbon filter. Perhaps you want your kitchen to showcase an old school look. Maybe having an extremely modern faucet feels intimidating to you. If yes, then a pull out faucet is exactly what you will need!
On the plus side, such kinds of faucets occupy less space as compared to a regular model. It is the best fit for such kitchens where the space above sinks is not empty.
If you’re a full time cook and most of your waking hours are spent working tirelessly inside a humid kitchen, do not worry. A pull out faucet’s height will easily enable you to fill larger pots and utensils with fresh, clean and filtered water.
If your sink is not too deep, a pull out faucet will save you from a huge water splashback straight on your face, which a regular tap will not do. No one wants their face to be all soaked in water while working in the kitchen.
No one understands your kitchen needs more than you, right?. Dear reader, I wish you all the best on your incredible new kitchen renovation.
You would be thrilled to know there are more than one ways to install a water filter pull out faucet. For instance, attaching it onto the far end of your kitchen faucet or making use of a hose attachment to withdraw water from the faucet to the filter.
Below I have presented a complete guide that will walk you through this journey.
Step 1: Measurements
Measurements are fundamental to everyday activities.
First of all, grab a plate from the water filter and place it on your sink. This is the point where you wish to set up the pull out faucet. Trace the center hole of the plate onto the sink deck with a pen.
Now, drill a 3.8 inches diameter hole in the sink on the plate’s halfway mark.
Step 2: Slug Cutter
After the measurements, comes the time to set up a slug cutter within the initial hole. If you don’t know what that is, a slug cutthroat off a piece of any particular length from a clay bar.
Take a wrench or spanner to tighten the nut. Keep tightening until the slug cutter successfully punches a gap.
Then, place your faucet in the gap created in the sink deck and mount it well with a socket wrench. Remember to ensure that the retaining nut from below is fully tightened.
Step 3: Detaching the Cold Water Supply
After that, disconnect the supply of cold water from your pull-out faucet.
You might’ve noticed an L-shaped fitting and a filter in your sink faucet. Shred it off, acomeen tighten the line of supply to the base of this L-shaped fitting.
Step 4: Putting in the Cartridge
In this step, you will need to screw two essential items to the inside of your sink cabinet; the upper housing of the filter and the hanger bracket.
After it is adjusted, place the cartridge under the housing and lock it well in its place.
Step 5: Testing
In this final step, press the on and off tubes located above the housing. Try using the water filter pull-out faucet to see if it is functional.
Congratulations, you have successfully installed a water filter pull-out faucet by performing minimum plumbing chores!
Making a fair choice of water filtration system for your home can be overwhelming, as the options are never-ending. This is the number one reason most householders prefer to install a filter on a pull-out faucet so that every house member can get potable and healthy water right from the kitchen tap.
With ample access to clean water, you also get the facility of safely washing fruits, vegetables, and dishes. You will never have to worry about how you will manage to clear away the accumulated debris around the sink because your water filter has everything under control now.
On a deeper level, having a faucet filter ensures that all the little yet harmful toxins do not escape from the pipes and slide right into your tap. It will eliminate water-based contaminants such as chlorine, lead, carbon, sulfur, and pesticides. They are not worth risking your health, are they?
Once your water filter on a pull-out faucet is functioning effortlessly, you will witness all the benefits firsthand. You are unarguably blessed beyond measure when you have easy access to healthy and pure water to keep you hydrated. Surely this method is cost-effective and welcomes you towards a better quality of life.